DSP-MQ150 die cutting machine
The semi-automatic pole piece punching machine is a soft-pack battery positive and negative pole production equipment developed by our company and suitable for experiments or small batch production. The equipment uses the principle of gas-liquid supercharging to convert a smaller air source pressure into a larger hydraulic output. The cylinder drives the mold to punch and shape the metal pole piece. The equipment has beautiful appearance, scientific and reasonable design, simple and convenient operation, and the mold can be customized according to customer requirements. This operation is between manual and fully automatic, suitable for roll materials and sheet materials; it can be manually fed continuously, automatically discharged, and can automatically separate waste materials; there are no quality defects such as burrs, powder loss, or indentations; the knife mold can be replaced Convenient and fast (the die is a consumable product with a lifespan of about 100,000 times); easy to operate, safe and reliable, beautiful in appearance and small in size.
1. The infrared positioning device is used to accurately and conveniently position and die-cut the pole pieces;
2. It is convenient and fast to replace the die;
3. The hardware mold has a long life and can be used normally ≥ 500,000 times; it is equipped with a hardware knife mold
4. Really solve the quality defects such as burr control within 10 microns, no powder loss, no indentation;
5. It is between manual and fully automatic, with high efficiency of 800-2000 pieces/hour;
6. It adopts four guide pillar structure, allowing smooth up and down sliding with high precision;
7. The equipment feed port has a safety protection light curtain, making the operation very safe;
8. Exquisite appearance, the sheet metal adopts three-dimensional geometric design, simple and beautiful;
9. Easy to operate, safe and reliable, small size;
1. Configuration power supply: 100V-240V/60Hz
2. Power: 10W
3. Compressed air: ≥0.6MPa
4. Applicable specifications: Maximum punching size: 250x250mm (the maximum punching size can also be unlimited according to customer requirements)
5. Aluminum plastic film thickness: 0-0.5mm
6. Pressurization cylinder: 5T
7. Stretching cylinder: 0.15T
8. Feeding method: Manual
9. Equipment production capacity: 800- 2000EA/H
10. Punching accuracy: ±0.1mm
11. Weight: about 120KG
