DSP-RVTS10B single station top side packaging machine
This equipment is mainly suitable for packaging the top and sides of soft-packaged lithium batteries.
One、Working principle:
It is transferred to the head (copper) through the resistance heating tube, and the heat conduction effect is used to act on the packaging material (aluminum plastic film) of the lithium battery. Under a certain pressure, it is heated and softened, close to the molten state, and the pressure fusion is completed. . And top sealing and side sealing can be achieved without changing the mold.
Two、 Main features:
1. Unique safety protection and anti-scalding design, the temperature of the upper and lower ironing heads can be adjusted through the buttons on the thermostat panel and the current value of the temperature;
2. The head is made of copper material, which has good heat transfer effect, saves power consumption, improves work efficiency, and is more energy-saving than similar products;
3. The pressure of the upper and lower heads can be adjusted through the pressure regulating valve to achieve different process parameter requirements;
4. The upper and lower heads are driven by a cylinder and guided through two linear guide bushes. The upper and lower heads are flexible and the guidance is accurate to ensure the parallelism requirements after the product is edge-sealed;
5. It can be applied to product batteries of different specifications, and the adjustment is simple and convenient, without the need to adjust and replace the head;
6. The frame is made of aluminum profiles, which has a beautiful appearance; the sheet metal adopts a three-dimensional geometric design, which is simple and beautiful;
7. Small size, smooth and even sealing marks, and beautiful edge sealing appearance;
Three、How to use
When the temperature parameter reaches the set value, hold the battery core and place the edge sealing of the battery core under the sealing head to align the edge sealing position. The foot switch is activated, and the cylinder drives the upper heat sealing head to press down the package and heat the aluminum plastic film. It becomes soft and close to the molten state, presses and fuses to complete the heat sealing and crimping action, and the battery core is taken out manually to complete.
Four、 Technical parameters
1. Applicable specifications: side seal ≤200mm, top seal 200mm (including air bag).
2. Head length: 200mm.
3. Seal width: standard 6mm (3~10mm optional).
4. Edge sealing thickness: 0.15~0.3mm (depending on the thickness of the aluminum plastic film).
5. Heat sealing temperature: 0~250℃ (temperature can be set freely).
6. Temperature control accuracy: ± 2℃.
7. Packaging time: standard 2S-3S (0-99s adjustable).
8. The upper and lower copper molds must be parallel to each other to ensure no light is transmitted.
9. Equipped with protective device to prevent high temperature burns.
10. The equipment has a material receiving table.
11. The equipment has automatic and manual operation functions.
12. The equipment is easy to clean and replace the copper mold.
13. Compressed air: 5～8kg/cm2
14. Air pressure working speed: ≥400 times/hour
15.Power supply: AC220V/50Hz
16.Power: 0.5KW
17. Overall dimensions: L430x W330x H480mm
18. Equipment weight: 35Kg
