Our services Category

DSP-TS200 Vacuum Secondary Packaging Machine

DSP-TS200
This equipment is suitable for medium and large-sized flexible packaging lithium battery cores to be liquefied and finally vacuumed and sealed for packaging. It has high production efficiency and can be used in both laboratory and production, reducing repeated investment.

Consult

Features Technical Indicators Overall Dimension

Product features:
First, place the battery on the loading and unloading stations on the material tray, start the double-touch button, and the PLC displays the working packaging process. The upper and lower chambers are combined, and the three parts form a sealed chamber, and the pumping is completed in the chamber. Vacuum, puncture, hot-press composite, and finally remove the sealed battery.

Equipment technical parameters:
1. PPM: ≥ 4
2. Equipment failure rate: ≤5% (referring to failures caused by equipment, regular equipment maintenance, pre-production preparation, etc. are not included)
3. Packaging excellence rate: ≥ 98%
4. Battery core length (mm): 0-200
5. Cell width (mm): 0-150
6. Battery core thickness (mm): ≤10
7. Side sealing width (mm): 3-10
8. Air bag side width (mm): 20-90
9. Seal thickness accuracy (mm): <15um
10. Width of outer unsealed area (mm): ≤1
11. Seal width (mm): ≥4MM
12. Pumping vacuum degree (kPa): ≤-95
13. Pumping time (s): 2-8
14. Equipment electrical: AC220V±10%-50Hz; power: 4.5 KW.
15. Compressed air: ≥0.6MPa 15L/min (prepared by user).

16. Vacuum source: ≤-0.095MPa 200L/min (prepared by user).